I just bought new Monroe front struts and started to mount them and they are extended 1 inch to far to hookup to the knuckle anybody had this problem ive tried to collapse them and no luck any help out there
|
|
03-08-2014
I just bought new Monroe front struts and started to mount them and they are extended 1 inch to far to hookup to the knuckle anybody had this problem ive tried to collapse them and no luck any help out there
03-08-2014
So you can't get either bolt on the knuckle started??
The 3 bolts on top are in their holes right?
03-08-2014
Had that problem with them doing that. Had to stand on the LCA to move it enough to slip the bolts in.
Sent from my Galaxy Tab 3
03-09-2014
Just stick a pry bar in the lower control arm and push it down, then slip a bolt in the knuckle/strut. Done.
03-09-2014
Mine were too long to, just pry down but be sure you put the top bolt in right or you can ruin the bolt and the steering knuckle.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
