Thread: Grinding sound when making sharp left and awful creak sound when going over bumps

Results 1 to 6 of 6
  1. #1 Grinding sound when making sharp left and awful creak sound when going over bumps 
    SE Level Member
    Join Date
    Dec 2011
    Location
    mn
    Posts
    6
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hey all, I got my tax return back and was thinking about doing some maintenance on my 04 GP GT. I have a few issues that have been around for a while, and I was hoping someone here could help me diagnose the issues. The first problem is a grinding sound that is audible both inside and outside the car when I make a very sharp left turn (think 100 percent when making a U-turn or driving around corners in a parking garage at slow speeds). The sound definitely comes from the driver's side. It almost sounds like the wheel rubs on something, but I can't figure out what it would be. It doesn't do it when I make similar turns to the right.

    The second issue is a very loud creaking sound when I go over speed bumps coming from the front of the car (I think it's driver side, but difficult to tell).

    I'm sitting at 139000 miles, 49000 of which were driven my be. As far as I know, there hasn't been any maintenance or changes done to the suspension. Is there anything I should just up and replace at this point? I found a how-to on replacing the front sway bars, and I'm confident that is something I can do on my own, but is there anything expensive I should be planning for? I've noticed the cornering is getting a little sloppier as she ages, it'd be nice to get some of that back.

    Thank you for any help you can offer!
    Reply With Quote  
     

  2. #2 Re: Grinding sound when making sharp left and awful creak sound when going over bumps 
    Turbo is the way to go. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    21,030
    Thanks (Received)
    21
    Likes (Received)
    45
    Dislikes (Received)
    0
    Wheel bearings for the grinding sound.

    Where in MN you at?

    SMGPFC Member #1
    Reply With Quote  
     

  3. #3 Re: Grinding sound when making sharp left and awful creak sound when going over bumps 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    creaking could be cv joints.
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  4. #4 Re: Grinding sound when making sharp left and awful creak sound when going over bumps 
    SE Level Member
    Join Date
    Dec 2011
    Location
    mn
    Posts
    6
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I'm from the TC. Thank you both for the help. I'll make sure I ask my mechanic about those two things when I bring it in for an oil change in the next week or two.

    Ideally, if I do need to start replacing these things, I'd like to have the stock suspension that the comp G comes with. I've been reading over the other posts, and it doesn't seem like it would be all that much more expensive than the stock GT setup. Is there anything I should know about going that route? Or is it pretty much just telling my mechanic to order those parts instead?
    Reply With Quote  
     

  5. #5 Re: Grinding sound when making sharp left and awful creak sound when going over bumps 
    Turbo is the way to go. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    21,030
    Thanks (Received)
    21
    Likes (Received)
    45
    Dislikes (Received)
    0
    Depending on where in the TC, I can help you out if its indeed a wheel bearing problem. I know a thing or 2 about replacing them, just thought I throw it out there if you want to save some money on shop costs.

    SMGPFC Member #1
    Reply With Quote  
     

  6. #6 Re: Grinding sound when making sharp left and awful creak sound when going over bumps 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,997
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    your going to need to go over the whole front end, my lca's were making a lot of noise, and my sway bar was broke, the tie rods were also bad. every last part for the front end can be changed fairly easily and in your drive way with a small amount of regular hand tools.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

Similar Threads

  1. Grinding sound after installing HAI?
    By blackflag in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 9
    Last Post: 02-19-2012, 05:36 PM
  2. Grinding sound
    By gpgt04 in forum General Tech Discussion
    Replies: 1
    Last Post: 12-18-2009, 09:18 AM
  3. Grinding Sound
    By Strype in forum General Tech Discussion
    Replies: 3
    Last Post: 09-02-2009, 01:15 PM
  4. bad grinding sound
    By Charged97 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 2
    Last Post: 01-22-2009, 04:53 PM
  5. my car isnt making a WOSH! sound anymore when i turn it off?
    By 99prixgt in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 23
    Last Post: 09-13-2008, 11:00 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •