can someone with an 03 or older gp please take a picture of how your front sway bar is connected to the control arm? i am looking at the front sway bars offered for the 03 and earlier and they look exactly like mine.
|
|
02-10-2012
can someone with an 03 or older gp please take a picture of how your front sway bar is connected to the control arm? i am looking at the front sway bars offered for the 03 and earlier and they look exactly like mine.
Last edited by f3racer; 02-10-2012 at 10:02 PM.
02-11-2012
I'm guessing, just based on your question that you have an 06? Now I see it in your sig.
If your front sway bar attaches to your control arm (not the strut) then your setup is like the 03 and earlier. 04 & 05 changed it as I found out doing struts on my 05 (stupid GM). For 06 they went back to the 03 and earlier configuration (although there is discussion on this board that there may be some 06 with the 04/05 setup)
02-11-2012
Here you go
02-11-2012
ok so i have something crazy. my sway bar looks like that. the end is parrallel to the ground but it doesnt attach to the control arm. it attaches to a long link going up to the strut. i looked at an 07 yesterday and the sway bar end is perpendicular to the ground on his. and then linked to the strut.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
