Quote Originally Posted by gtpeddie View Post
alright guys i know this might be a stupid question but i dont know, how do anti-pogo washers work?
How this mod works: The top strut mount on the front fenders have a retaining nut along with a retainer cap; this will hold the strut rod, which comes through the center of the mount, in place. With the stock springs, this retainer is in direct contact against a rubber cushion underneath it, this is what directly connects the strut to the mount. With lowering springs, this retaining cap is raised up about a quarter to a half inch, so the strut is no longer firmly secured against the mount! What this means is that the spring can bounce up and down this tiny bit before the strut even begins to act on it.

http://www.clubgp.com/cgi-asp/mods.asp?modid=68



Sent from my SGH-T679 using Tapatalk 2