One of the rear lines popped on our 2003 GTP. It looks like right at the bracket that attaches it to the lower firewall. Got looking at it and none of the lines look good. I'm going to replace them all. It does not look like any fun. Anyone done it? Tips or tricks?
As an aside, we still had some back braking action. I drove it 9 miles home. I jacked it up and freed the lines up from one of the clamps to try to identify the source of the leak. Once I realized the severity of the situation, I put it back on the ground. When I went to move it I had NOTHING at all brake-wise, which is scary because I live on a really steep hill. My driveway is 500 feet long down to the street. But, the parking brake works so I was able to move it off to the side using that until I can figure next steps.
It looks like SS Tube makes a stainless kit. The issue might be, however, getting the old lines out and new ones in. It's tight in there.
