Thread: projector led halo headlights problem

So i bought a pair of projector headlights with halo and led light.. spliced them with my turn signal wires and it went all down hill from there..now my headlight switch dont turn on my parking lights and my dash light went out also with the door open without my car on or no key in ignition it constantly dinging.. (99 GP GT)

you didn't tie the halos and LED's in with the fogs? did you check fuses? Did your wire them up right? undo what you did and see if it fixes it. I would go through the fog lights not the parking lights as they are tied in with the blinkers (at least on my 98 GTP)

I will come fix the issue for gas money there and back lol

lol that could be a good deal.. but ya i was checking the fuses under the hood and the it does look like a few may be bad..but i dont see how everything was working perfect before i attempted to install these friday.. now my fog lights work with my brights and not with low beams and switch has no control.. parking lights now only work with turn signals/ led and halo flash with them but dont have control over parking lights either..just low and high beams

You have them all missed wired. that is the problem for sure. undo everything and hook up our oems the way they were and see if it fixes the issue. there are fuses un the glove box as well not just under the hood. like I said I can help out if needed. also post some pics through photo bucket so I can see your wiring job and we can trouble shoot it from there.

ok...its not pretty at all though

lol. well post what you can so I can look at it. Also try to get the wires as well where you connected at as well

CAM000421_zps2dbf72eb.jpg Photo by Ronnie_Marcus | Photobucket

those are how i have it currently... my oems are currently not with me.. will able to get tommorow