I would still verify power to the switch. If power there, then activate the switch in both directions and verify you're putting power out at the motors going both directions. I wouldn't rule the regulator/motors out just yet on this
|
I would still verify power to the switch. If power there, then activate the switch in both directions and verify you're putting power out at the motors going both directions. I wouldn't rule the regulator/motors out just yet on this
Let's see. 14 yr. old 2-door car w/ heavy chunk of glass and regulators that were known to break looking at them sideways, my bet is on the motors being shot. This assuming that you have power at the switch and all fuses are good to go.
Do you notice the lights in the car dimming at all when you hit the switch?
« Previous Thread | Next Thread » |
Tags for this Thread |