Good Easy to Install Replacement Tweeters?

Anyone?? bueller bueller?? leave the stock tweeter unplugged or wire it up with new 5 1/4's ??

do both and see what sounds best.

Thanks matt... so i don't have to worry about this statement? " If there is an aftermarket speaker in there (eg: my new 5 1/4's) and you connect the tweeters, the impedance will drop and will blow your head unit in time"??

you do.

just wire in series.

memphis m class hard dome tweets here , nice and not very expensive , or jl vr075 , but your gonna pay a lil for them ...i think around 150 , memphis about 60-75

At first I just wired an extra pair of tweets to the 5.25" in the door and put them in the little trianglehttp://a4.sphotos.ak.fbcdn.net/hphot..._7154693_n.jpg by the mirrors, worked good...

Your little "triangles" didnt already come with tweeters in them?

Quote:

---

Originally Posted by Colossus

Your little "triangles" didnt already come with tweeters in them?

---

I think he means he stuffed more tweeters in there, although it does look like he drilled the holes himself loll.

No, they didn't come wit holes or tweets. I did go to the junkyard and find some that do have holes in them and put those in. But those holes are smaller in diameter, I put 1" tweets in there and wonder if the sound comes out as much...

I have never seen a gp without the tweeters

Quote:

---

Originally Posted by KeithGTP03

Here are some stock tweeters...I'd stick with those if you're runnin stock equipment. You can tell if your rear are stock by looking up at the bottom of them from the trunk.
D6 98 99 00 01 02 03 GRAND PRIX SPEAKER / TWEETER | eBay

If the stock tweeters were unplugged, there is a good chance that the p/o changed the stock midrange to a coaxial speaker. You will want to check that and make sure. If there is an aftermarket speaker in there and you connect the tweeters, the impedance will drop and will blow your head unit in time.

---

Please explain the comment on the tweeters. I kept mine connected, as well. If I need to tear the doors apart again to disconnect, I'll do it, but would like an explanation. Why will less impedance blow a head unit? Right now, they're wired into the connector harness that came with the speakers, not in series.