Wiring Help!!

[Taz Magister]

Alright so I got this cutout and 12volts dc and heres a pic of the wires coming from it.



its got some kind of connector which the guy didnt have the other end to so I was planning on chopping that off and soldering my wires to it.

Heres the part thats a little bit more tricky the switch has four wires coming from it.


and I heared that you can just use the cigerette lighter as your power source and ground is that true?

my other question is from the switch I have one red one black and a white and a green whats the deal with the white and green I assume the with is the ground correct? I guess what I don't get is I know I need two wires coming into the switch with power and then I need two wires going out or possibly one wire going out and the other already going too the cutout and then the switch would complete the circuit.

I haven't done anything like this in awhile so if someone could help make sense of this for me that would be awesome

[Taz Magister]

anybody?

[Taz Magister]

...

[dsmuts]

One common ground, one to open, and one to close? Hook it to a battery and see what it does.

[FoSHO99]

What brand of cutout is it? It's not just an on/off kind of thing its a open/close action.

[Taz Magister]

its a Dmh

[Taz Magister]

bump

[2003 SSEi]

Red and Black from the switch go to power and ground, Green and white from the switch go to Red and White on the cutout

[Taz Magister]

alright thx, does anyone know how to pop the cigerette lighter out? I'm probably just going to cut the thing off completly since I don't use it