okay so i bought a RTX hid kit for my 2004 grand prix gtp, i pluged everything in and nothing happened.. i could use some help !! thankyou !
|
|
12-29-2010
okay so i bought a RTX hid kit for my 2004 grand prix gtp, i pluged everything in and nothing happened.. i could use some help !! thankyou !
12-29-2010
i pluged the stock headlight one into the ballast, and the two comming from the ballast into the new lightbulb.. but there is one 9006 plug left over....
12-29-2010
can you post a pic of how you have it connected? mine went in super easy
12-29-2010
youll have one of the stock plugs just hanging out. id recommend covering it so it doesnt get all goobered up on the inside with corrosion.
the HID harness plugs into one headlight plug, then distributes to the ballasts and bulbs.
12-29-2010
is it a relay harness setup? That might be why you have a plug left out.
12-29-2010
i found the problem the wires from the stock 9006 plug didn't match the ballasts.. so the negative was connected to the positive... soo i took the plug put it upside down and used the pull ties and snugged it tight, tried to switch the pins but they wouldnt come out
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
