I'm pretty busy until this weekend being classes have started again. I'll be doing a writeup later that shows how I did this. There's no need for a tape deck or external cd changer. I bought about $70 worth of electronics to figure this out so hopefully some of you would donate if you find this write-up useful. This install would cost less than $10 if you already have a solder gun/solder and a multi-meter. The sound is perfect and there is no static if done right. The treble/bass work as well as the equilizer
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
