Thread: How to flush mount rear speakers?

Just wondering how fellow members have mounted the rear deck speakers (6x9) so that they are flush with the inlay?

going to be a search for sure i wish i could help but the last time i was in the back of a 5th gen was in 00

is it too big to fit?
my other rear speakers i was told were 4in so i ordered some and the didnt sit flush, so i took a dremel and custum fit them

show pics maybe i can help

heres my plan... In my grand prix the 6x9's sit a couple inches below the carpet board and are screwed to a plastic mount which rattles and is flimsy... i fiigured if i mounted them right to the carpet board I would be able to eliminate the plastic mount but dont know for sure how to do it... thinking maybe taking quarter inch plywood and carpeting it to match and cutting the hole for the bottom of the speaker to sink into

Like this ^^^^^.... mine sit under the carpet board and I want them like these, except mine are 6x9's

You need to take a better look at your car. The 6x9 enclosures bolt and clip into the metal rear deck. I doubt you can directly bolt them in w/o getting a plate to take up the excess space.

I dynamatted to solidify them in my Regal. May be a cheaper/easier way for you.

bill hes not our gen of gp

imo use mdf thats gonna be the best to work with on something like this

bummer... I had the answer for our version..lol

I dont want the bandpass i only want to get my speakers to sit flush, thats it... I know how I'm gonna do it... going to use mdf and mount the speakers then re-carpet the whole rear inlay so it looks good...