Re: Getting new subs want opinons.
Quote:
Originally Posted by
MrTube
Says you :)
besides,
cone breakup happens at all frequencies. a 15" driver will have plenty at 30Hz.
cone breakup is an issue with midrange speakers... in the area of 3-10 KHz.
Subs are directional above 100-150 Hz. So if you're crossing over at 80 Hz, thats dangerously close to too high.
40-50 Hz is a much better spot which gives you much more freedom in your sub location.
Heres a better question, how does a 15" sub have breakup at 30 Hz?
At 30 Hz, the entire cone is moving a large distance and all of the second and third harmonics are due to suspension and motor non-linearities, not the cone...
Re: Getting new subs want opinons.
Re: Getting new subs want opinons.
.707 is meaningless. You can aim for it, but it still may not turn out right.
.8 is a better goal for cars.
.5 is a nice goal for home theater.
But if you're going for home theater, you should be building an LLT or many sealed boxes or a true IB.
Re: Getting new subs want opinons.
I'm more used to working with home speakers where you often run the woofer to 1-2KHz. However I've also had the understanding cone breakup happens at all frequencies. I know 10" woofers of all materials including aluminum have a large amount of breakup even below 1Khz and to me, thats mid-bass not midrange.
tho as you said, 80Hz is too close to being directional. Thats why I typically cross subs at 40-50Hz. unfortunately its very hard to find drivers that will produce clean loud sound below 60Hz in a car. So i typically aim for 60-70Hz crossover.
Re: Getting new subs want opinons.
If your 10" woofer is crossed over at 250 Hz then why would you be concerned with whats happening at 800+ Hz? thats between 12-30 dB below the reference level granted you're using either a second or fourth order crossover. Even then, depending on the driver, you may be fine running it higher.
Clean sound below 60 Hz means having the displacement to do it as well as not having them firing into the trunk at all.
Try a pair of these in the doors.
http://creativesound.ca/pdf/TRIO8.pdf
That ought to solve your midbass problem.
Bass = <40 Hz.
Midbass = 40-150 Hz
Midrange = 500-3000 Hz
Treble = >3000 Hz
Hole between midbass and midrange is because its HIGHLY debatable but one things for sure... midrange's often work in the 250-1000 Hz range. You'd be surprised just how high those frequencies are. Try listening to some test tones.
In car audio, the issue is, your woofer can only run up that high if its on axis, which it can't be. 250 Hz is a good goal for your midrange to midbass crossover.
Re: Getting new subs want opinons.
Quote:
Originally Posted by
matt5112
.707 is meaningless. You can aim for it, but it still may not turn out right.
.8 is a better goal for cars.
.5 is a nice goal for home theater.
But if you're going for home theater, you should be building an LLT or many sealed boxes or a true IB.
Meaningless? I was around .52 originally and now I'm closer to .68. I can tell a difference in the roll off. The .52 isn't as "smooth" as the other. The lower was very clean but it didn't carry a roll off which made majority of drums and bass unrealistic.
That was my experience with my speakers tho :/ I guess it's different with everybody. I can see how .5 makes closer to 20hz much cleaner. I did like that aspect. Double kick was much cleaner too.
Re: Getting new subs want opinons.
Quote:
Originally Posted by
I800C0LLECT
Meaningless? I was around .52 originally and now I'm closer to .68. I can tell a difference in the roll off. The .52 isn't as "smooth" as the other. The lower was very clean but it didn't carry a roll off which made majority of drums and bass unrealistic.
That was my experience with my speakers tho :/ I guess it's different with everybody. I can see how .5 makes closer to 20hz much cleaner. I did like that aspect. Double kick was much cleaner too.
So you like the typical roll off? then either learn to appreciate "flat" sound or build for ".707"
With cars, you have to remember there is MASSIVE cabin gain and its highly unpredictable.
So picking a Q and aiming for it won't help you unless you know what sounds good in your particular car and to your own ear.
with a decent sub, .8 should be good in most cars. they SAY .707 is good for home, but it really isn't considering room gain doesnt start till 30 Hz, and even then, it doesnt stack much.
I had an 18" woofer in a 21 cubic foot box tuned to 12.5 Hz with an 8" wide port, 36.5" long....
That... was the cleanest sub I've ever heard. My current setup is that same 18" sub re-coned in a 7 cubic foot box with two 18" passive radiators.
Doesn't even compare in terms of sound quality but its much less of an eyesore.
Then again, going from a coffin sized sub to a washing machine sized sub isn't much of an improvement.
It does weigh around 220 lbs when fully loaded though. Can you spell resonance-free? :th_thumbsup-wink:
But to the point, horrible sound quality relative to the coffin sub.:th_jester:
Re: Getting new subs want opinons.
matt : i'm fairly certain a 12 or 15" driver will have breakup at low frequencies as well. However before I speak I am doing a bit of research.
Re: Getting new subs want opinons.
I think what I heard is the same argument we always have...processing vs no processing :)
EQ vs. dedicated build?
Re: Getting new subs want opinons.
Quote:
Originally Posted by
MrTube
matt : i'm fairly certain a 12 or 15" driver will have breakup at low frequencies as well. However before I speak I am doing a bit of research.
The question is, what 12 or 15" driver are you going to have playing that high that you need to concern yourself?
If you ARE running a woofer that high, then its no longer playing the roll of the sub but rather the midwoofer. Be prepared to spend big coin on a good midwoofer.
DIY TC Sounds LMS-5400 18" sealed 100L - Home Theater Forum - Home Theater Systems - HomeTheaterShack
And that is the single best subwoofer ever made in terms of low end output and sounding good doing it. :th_thumbsup-wink:
Quote:
Originally Posted by
I800C0LLECT
I think what I heard is the same argument we always have...processing vs no processing :)
EQ vs. dedicated build?
I agree with T/A but not EQ. :)
To anyone/everyone:
To me, this is how I see your ideal car audio system going down...
- a pair of subs in the rear deck covering 0-40 Hz
- a midbass driver in each door covering 40-200 Hz
- a midrange either on the dash or the door covering 200-(2000-4000) Hz (range is there due to size constraints and design restraints that may arise, also IMD comes into play and causes bad things to happen :))
- either a pair of tweeters on both sides or a single widerange driver that covers 2-4 KHz up to say 15 Khz
- a supertweeter on each side for +15 Khz
The supertweeter part only applies if you can still hear that high :)
In home audio, the tweeter part is simple: ribbon tweeter.
In home audio, the midrange part is simple: pro audio mid range
In home audio, the woofer part is simple: capable woofer such as a pro audio woofer or perhaps one of the AE woofers.
In home audio, the sub part is complex because of "size" constraints and the WAF if any of you even KNOW what WAF means around here :p
Re: Getting new subs want opinons.
Matt : i disagree with you on almost everything you said about home audio.
All i'm going to say is I've heard many quality 2-way designs outperform every other layout i've heard. more drivers means more crossover points means more problems. And most "pro audio" drivers are designed for high output at high distortion levels. Good luck finding a pro audio woofer with less then 10% THD.
and on car audio, a super tweeter for above 15KHz? we've had quality tweeters that could produce 3KHz-20KHz since the late 50s. And besides a lot of people not being able to hear above 15Khz theres almost no audio content in music there either.
Re: Getting new subs want opinons.
Quote:
Originally Posted by
MrTube
Matt : i disagree with you on almost everything you said about home audio.
All i'm going to say is I've heard many quality 2-way designs outperform every other layout i've heard. more drivers means more crossover points means more problems.
and on car audio, a super tweeter for above 15KHz? we've had quality tweeters that could produce 3KHz-20KHz since the late 50s. And besides a lot of people not being able to hear above 15Khz theres almost no audio content in music there either.
Ah, you're one who does not care much for a system that can handle a party or two. :th_nanana:
Try putting your 2 ways in a home theatre where you're 15 feet away from every driver. It doesnt end well. :)
3-20 KHz and it doesnt clip at 3 Khz? Why you must not be turning the volume knob far enough to the left. :th_jester:
Again, volume is the main thing that determines how far you need to take this.
The fact of the matter is, a small set of those THX certified speakers that logitech sells will sound AMAZING until 95 dB where they start to compress. By 100, you'll break them. That and the insane amount of clipping just means you're going to damage your ears quicker in the process. I havn't been able to find any studies to back that last piece up, but that seems to be my own finding.
95% of 2 way speakers need a sub to back them up. Try a TL with a full range driver.
It'll sound great........ at low levels.
And pro audio aiming for clipping? I see... you need to venture into the world where we TEST these "horrible sounding atrocities that some dare to call a loudspeaker" and pick up a pair and try 'em for yourself.
Better yet, if you can't tell the difference between a speaker thats distorting to hell and one thats nice and clean, you shouldn't be attempting to design your own speakers.
I just remembered....
This is a 2 way speaker, and yes, it is better than the system i mentioned above.
http://i272.photobucket.com/albums/j...earray1/17.jpg
Re: Getting new subs want opinons.
get an alpine type r 15". i loved mine. great sq, got loud when you wanted it to, and it took 1100w daily no trouble.
Re: Getting new subs want opinons.
matt : my two ways will hit 115db in a 10x20 room. However my record was exceeding 130dB in a 10x20 room, but it was done with 4 ways that had mid and tweeter horns. I feel i've "cranked it up" as much as the next guy. :)
Re: Getting new subs want opinons.
That two way I posted a picture of would probably be in the 120-130 range. :)
I guess I completely forgot about horns. Just not a fan of them, havn't really heard any of them that sound pleasing to my ear.
That and they're mostly pro audio equipment so I'm not sure why you're recommending them :p
Re: Getting new subs want opinons.
Matt : im weird, i'll admit to that :)
I did my research and what I thought was correct. Large drivers DO have cone-breakup at low frequencies. If you look at the cone of a 12-18" woofer producing 30-50Hz with a strobe light all you will see is the cone flexing all over the place. Its distortion galore. And the larger the cone, the worse it gets. I also never said pro audio aims for clipping. The woofers generally produce very high levels of harmonic distortion. In fact all woofers do, If you get down to 1% your doing pretty good.
I love the sound of sealed quality woofers and quality horns. I honestly do not know why. Horns are rarely considered "quality" midrange or tweeters.
I suppose in the end, I like bass tight and flat. I prefer a system that can produce below 30Hz with low distortion, Yet I like bright highs and strong midrange. most pro speakers ive heard always sound boomy and hollow to me.
Re: Getting new subs want opinons.
Quote:
Originally Posted by
MrTube
Matt : im weird, i'll admit to that :)
I did my research and what I thought was correct. Large drivers DO have cone-breakup at low frequencies. If you look at the cone of a 12-18" woofer producing 30-50Hz with a strobe light all you will see is the cone flexing all over the place. Its distortion galore. And the larger the cone, the worse it gets. I also never said pro audio aims for clipping. The woofers generally produce very high levels of harmonic distortion. In fact all woofers do, If you get down to 1% your doing pretty good.
I love the sound of sealed quality woofers and quality horns. I honestly do not know why. Horns are rarely considered "quality" midrange or tweeters.
I suppose in the end, I like bass tight and flat. I prefer a system that can produce below 30Hz with low distortion, Yet I like bright highs and strong midrange. most pro speakers ive heard always sound boomy and hollow to me.
Hence the ideal cone material for subs being one that doesnt flex. Say, aluminum or titanium? :th_thumbsup-wink:
This is where building for headroom comes into play. If you're going for the absolute lowest distortion in home audio, line arrays= win.
If you're aiming for flat response, you'd need 4 18" hi-xmax woofers with around a thousand watts on each one positioned at the midpoint of each of the four walls of the room. That should be good until 3 Hz if you're careful about your room choice/design and amp choice. They obviously won't put out 130 dB at 3 Hz but in the home environment, 115 is usually more than enough to please most people.
Tight usually refers to the transient response. So if your ported sub isn't design for the room, then it'll sound boomy. If the sub itself wasn't designed to be used in a ported box, it'll sound boomy.
Sealed boxes work great in cars because of the massive cabin gain, but not so much in houses unless you've got many of them (Think IB).
Try an IB for your next home sub, i dont think it would disappoint granted you pull it off correctly. :th_thumbsup-wink:
Its partially about enclosure design as well. Most pro speakers cabinets will rattle all over the place with no absorption inside the box. The midrange drivers are most sensitive to this because the cones have to be very light in order to reach well past 2 KHz.
Re: Getting new subs want opinons.
Matt : you know thats what I thought too, but apparently aluminum cones also have breakup. I never did get to put the strobe light to my a/d/s/ 312rs's I should do that when I get a chance. its hard to think that they could flex.
I don't listen so loud these days. After the damage i've done to my ears, altho I can still hear 16-17KHz and older crt tv's annoy me bigtime with their squeel. I do have a constant ringing in my ears i hear in dead silence.
Most of the damage came from the setup I had that used 2 18" woofers in sealed cabinets an 8" midbass, a large midrange horn and a tweeter horn, All were Electrovoice drivers :) I know, your thinking "pro speakers" They never sounded boomy tho :) I agree 100% on pro cabinets being made poorly. I swear by 3/4" or 1" MDF with plenty of bracing.
So, outcome is for car subs buy 12" drivers capable of long excursions with aluminum cones and put them in well built sealed cabinets eh?
If\when I pull the stock 6x9's out i'll try to get some pics of them under a strobe :) I'm sure it'll look like the Atlantic.
BTW speaking of IB. I remember people building a wall between their backseat and the trunk and using the trunk as the sub enclosure, Hows this work out in the end?
Re: Getting new subs want opinons.
to the op the kickers like ported better as less mine do, L series are good woofers they can take more than what they say and be fine(ported) idk about sealed
Re: Getting new subs want opinons.
Quote:
Originally Posted by
MrTube
Matt : you know thats what I thought too, but apparently aluminum cones also have breakup. I never did get to put the strobe light to my a/d/s/ 312rs's I should do that when I get a chance. its hard to think that they could flex.
I don't listen so loud these days. After the damage i've done to my ears, altho I can still hear 16-17KHz and older crt tv's annoy me bigtime with their squeel. I do have a constant ringing in my ears i hear in dead silence.
Most of the damage came from the setup I had that used 2 18" woofers in sealed cabinets an 8" midbass, a large midrange horn and a tweeter horn, All were Electrovoice drivers :) I know, your thinking "pro speakers" They never sounded boomy tho :) I agree 100% on pro cabinets being made poorly. I swear by 3/4" or 1" MDF with plenty of bracing.
So, outcome is for car subs buy 12" drivers capable of long excursions with aluminum cones and put them in well built sealed cabinets eh?
If\when I pull the stock 6x9's out i'll try to get some pics of them under a strobe :) I'm sure it'll look like the Atlantic.
BTW speaking of IB. I remember people building a wall between their backseat and the trunk and using the trunk as the sub enclosure, Hows this work out in the end?
Using the trunk as enclosure is using a box made of thin sheet metal as an enclosure.... I'm sure you wouldn't want to try that. :)
You can try and find some old TC sounds subs or perhaps try the AE subs.
I prefer the TC's since they have more stroke.
You could also try some of the SoundSplinter subwoofers. The 18 I had was a great woofer... till I broke the cone. :th_shakinghead2: Gotta be careful with aluminum cone'd subs...
