|
|
12-27-2009
hey guys im putting a pioneer double din 7 inch lcd with gps, hd radio, bluetooth the whole shebang.....ive done lots of HU installs in 04+gp's but this will be my first dvd/gps unit.....just wanna know if install supplies are the same....im assuming i dont need a dash kit anymore? what about wiring harness' and i will have a brain to mount also.....what sensors or vehicle wires to i need to tap into as far as the brain goes? anyhelp is greatly appreciated thanks...
12-28-2009
All supplies should be the same. However, you may want to tap into a dimmer source. I am unsure on the double DIN stuff. I always go to crutchfield.com and see what they say when you plug your car info in.
12-28-2009
double din wont fit in the 97-03, these cars are din and a half or 1.5din...thanks a lot GM
12-28-2009
If you are putting it in you 00, you can do it, but it takes some fab work. I have not done it, but you can search it. Someone just put up some pics of their install
12-28-2009
And you got me all excited with "big install"...
It'll hook up just like any other deck but you'll need to mod your dash to get it to fit.
Go to the junker or PM fish and get a new dash bezel so if yours becomes fubar'd, you have a spare.
The factory harness is pre-wired for a dimmer, just gotta use the correct harness and you'll be okay.Originally Posted by Lawngoose
12-28-2009
Make sure you post pics i might take this mod up next
12-29-2009
its going in an 04+ i know its no biggie i just wanna know what new stuff ill run into with a double din/gps/dvd screen unit......
12-29-2009
if they want to keep the onstar and all of the door chimes there is a special wiring harness that needs to be used. its made by metra. i forget the model number. it would be on crutchfield
12-30-2009
ohhhh an 04 well that puts a whole different day job on things, good luck with the install
12-30-2009
the car doesnt have onstar
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
