I'm Pulling the throttlebody to clean it to see if this is what is causing the car to stumble and die. Is there anything I need to know before I start like having it set in a certain position or anything?
Thanks,
Jeff
|
|
04-05-2015
I'm Pulling the throttlebody to clean it to see if this is what is causing the car to stumble and die. Is there anything I need to know before I start like having it set in a certain position or anything?
Thanks,
Jeff
04-05-2015
Nope, pull it clean it, reinstall.
04-05-2015
So I went ahead and cleaned my TB on my 05'GTP, here are a few pics.
It's really easy to remove and has a reusable oring gasket. There is a water passage so note that.
Nasty TB
Fully open
Fully closed
Natural position
04-05-2015
just so your on the right page here. its inside the tb tube that needs to be cleaned of all the carbon, the sides and back of the butterfly flap too.
04-05-2015
Of course, I was thinking more of what the gearbox should look like. The inside was very clean. I figured everyone knew what a dirty TB looked like. Sometimes I start typing and get distracted and leave out most everything I was going to say.
Jeff
04-05-2015
ok, just making sure you weren't going down the wrong path here. carry on and tinker as you will.....
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
