I guess u could drop the cradle, its not like the motors are that hard to pull I just don't want to break down the engine that much. Rockers are just the valve covers and that's it.
|
|
03-10-2015
I guess u could drop the cradle, its not like the motors are that hard to pull I just don't want to break down the engine that much. Rockers are just the valve covers and that's it.
03-10-2015
You can take it out through the wheel well. I just did it today on my 04 Comp G. Drop the subframe about 6 inches and take it out. Then put the new one in, put everything back, and jack it back up. Here, Follow this.
http://www.gtpworld.net/viewtopic.php?f=49&t=6351
I printed it out and have been following it well so far.
03-11-2015
You should focus on building torque, not HP.
03-11-2015
stock trans is fine for just north of 300hp if you dont drive like a retard and have it set up right (4 years so far on mine).
03-11-2015
Mine is hitting 315 whp on a n* gen v 3.0, BTTK IC, ported heads 1.9 rr's, headers build. about 1600 in the mods.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
