|
|
11-03-2014
So i wanted to redo my setup and pull the supercharger off from the intercooler and re rtv it. sounds simple right? I thought so. Just ten bolts, and pry up and it should come out. I could not for the life of me get it to budge. Then i tried pry bars under the snout. i got nothing, i finally got a pry bar and big ass hammer and kept beating on it. Here is the result. Now i have TWO problems.
Last edited by Hardonyomom; 11-04-2014 at 02:22 PM.
11-03-2014
Just did this last week had to finagle a big pry bar between the core and s/c / intake working all sides. Eventually they came apart.
Sent from my iPhone using Tapatalk
11-03-2014
I got it! I just need to know how to put the top of the intercooler back on without taking the bottom off of the LIM. Is there a diagram of where rtv goes?
11-03-2014
how the hell does that even happen? did you follow this at all when you installed it? http://www.grandprixforums.net/threa...BS-Intercooler
11-03-2014
Originally Posted by atj8
Yes. read the top of the post. I was taking it apart, this is how it came apart. I should of used a pry bar between sc and ic and it would of came apart the way i wanted to . I basically just need to figure out how to put the intercooler back together now and where the rtv goes.
11-04-2014
"I could not for the life of me get it to budge. Then i tried pry barsunder the snout. i got nothing, i finally got a pry barand big ass hammer and kept beating on it."
[IMG]
11-04-2014
Why Yes , Yes I DID
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
