Thread: With a mps, can you use different providers pulleys?

I have an intense mps and I see a zzp pulley size that I want, can I use the zzp on my intense mps hub?

Yep. But only Intense/ZZP are compatible with each other. There are also another two brands that are interchangeable with each other but not with ZZP/Intense.

Thanks for that.

Anyone know if Wbody store pulleys fit on a zzp hub? looks to have about the same spacing and the 5 bolts.

Bummer...

how hard can it really be to pop 5 new holes in it if you really want to use it...

Originally Posted by Bio248

how hard can it really be to pop 5 new holes in it if you really want to use it...

No more difficult than drilling new lug holes on a wheel to fit your studs.

Originally Posted by industrialfish

No more difficult than drilling new lug holes on a wheel to fit your studs.

Lol that sounds pretty sketch. was just wondering bc the wbody store pulleys are like 15 cheaper. and no one seems to have a 3.2 laying around for me :P

Originally Posted by industrialfish

No more difficult than drilling new lug holes on a wheel to fit your studs.

c'mon now, that's completely different.

Originally Posted by Bio248

how hard can it really be to pop 5 new holes in it if you really want to use it...

They have the same centering diameter to center the pulley?

Easy to drill holes.
Hard to drill holes on center.

Originally Posted by sseilmnop

They have the same centering diameter to center the pulley?

Easy to drill holes.
Hard to drill holes on center.

Best case scenario is if the centers are compatible, you can use a step drill to widen the holes till they overlap and use washers on the bolts.

Centering diameter and back spacing. Better off getting the correct one.

Originally Posted by sseilmnop

and back spacing.

That's true, didn't think of that. WBS hubs have a thicker face to allow for their bolts to be countersunk.

the pulleys being $40 isn't really a factory in comparison to anything else on the car, either.