you can patch broken wires easy. get yourself a soldering iron, shrink tubes and solder. done deal.
always strip the ends back till you hit clean shinny copper, then solder.
|
|
06-11-2014
you can patch broken wires easy. get yourself a soldering iron, shrink tubes and solder. done deal.
always strip the ends back till you hit clean shinny copper, then solder.
06-11-2014
Had to do that once or twice with some RC planes/helicopters.. When you wreck it, some wire likes to decide to tear.
My only concern would be plugging it into the actual harness. I really don't want to go at it with 10lbs of electrical tape holding it all into the socket.
Any tips or ideas as to how I could approach that?
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
