Good and bad news

[tomtom123]

Good news is... Just got to.put on and plug in my MAP sensor and then pour oil/tranny fluid in and I am ready to start the car!!!

Bad news. The front 02 sensor doesn't reach. It has a really short cord kinda like the rear 02... da heck >.<
Will this affect me? And how bad?

Sent from my SM-N900P using Tapatalk

[BillBoost37]

extend the engine harness side of the wiring to make it reach

[BillBoost37]

extend the engine harness side of the wiring to make it reach

meaning.. cut and splice added wire in ...one wire at a time with solder and heat shrink

[tomtom123]

With it outstretched as much as I can get it, its like 7 inches too short

Sent from my SM-N900P using Tapatalk

[Fivefingerdeathpunch]

Buy a ZZP o2 extension harness.

I did, because I didn't want to cut wires.

[tomtom123]

Oh. I have a much worse problem. Somehow overlookee the rear knock sensor so its not plugged in. I just spent over an hour trying to plug that in and it just does not fit. The plug seems too big and I don't understand how..

Sent from my SM-N900P using Tapatalk

[tomtom123]

Does anyone know if the front and rear knock sensors take the same sized plug? Because my front sensor plug is smaller than my rear one and my rear sensor plug doesn't seem to plug into the sensor...

Sent from my SM-N900P using Tapatalk

[tomtom123]

Front knock plug...


Rear knock plug.. it looks too big

Sent from my SM-N900P using Tapatalk