Flexplate is trash....

**16MustangVet** · 05-24-2014

That vid is very hard to tell anyting. Chipped pistons was going off you saying sounds like rocks in the block.............

**jayroca** · 05-24-2014

Idk might have to be right beside the car to hear

Sent from my SAMSUNG-SGH-I747 using Tapatalk

**Scottydoggs** · 05-24-2014

Originally Posted by jayroca

Still tryna diagnose what's wrong if the flexplate wasnt cracked or broke the car would be able to be driven right guys? 3800's guru's step in vid below when I rev it the sound goes away though

http://youtu.be/mXUSY_uqj74

Sent from my SAMSUNG-SGH-I747 using Tapatalk

make another vid, take the throttle and hold it at 2000 to 2500 rpm for a few seconds, then drop the throttle. let it go right back to idle.

that will be much more telling vid.

**jayroca** · 05-24-2014

Originally Posted by Scottydoggs

make another vid, take the throttle and hold it at 2000 to 2500 rpm for a few seconds, then drop the throttle. let it go right back to idle.

that will be much more telling vid.

Ok

Sent from my SAMSUNG-SGH-I747 using Tapatalk

**REDCRAPGP** · 05-25-2014

Get underneath the car to and remove the inspection cover... And shine a light up there and you should be able to see the condition of the plate and if needed have someone turn the motor over via the crank bolt while you inspect the flexplate.

Thread: Flexplate is trash....

Thread Tools

Display

Similar Threads

Throwing all my GTP parts into the trash

Flexplate, how much, how to, and where.

Can you still get the AIDZ if you use a trash bag?...oh and I haz wheels now

trash talking GTP's

L26 Lifters and Flexplate in L67?

Bookmarks