2002 throttlebody on a 97 supercharger

[Erik Adam Rodriguez]

can i do this ?

[Scottydoggs]

not sure if your maf fits the hole in the TB right.

another thread a guy was using a 98 maf in a 99 TB iirc, and m still waiting to hear back is it was sealing tight or not. or causing him a vac leak.

you need to use your maf. the 2002 wont work. pretty sure it wont even plug into your harness.

[91parkave]

IF you di it you will have a p0171 and the MAF wont go into the throttle body two diffrent models after the 99' year better of going northstar or something and getting tuned for it.

[dsmuts]

If you use your 02 tb on your 02 car the sc will bolt up fine and you'll just have to redo some vacuum lines

[00grandprixgtp]

yes u can do a 02 on a 97 but the maf are diff from a 97 to a 02 the 97 is smaller then the 02 and it would need to be retuned for the different maf

[Erik Adam Rodriguez]

i will be using the 02 maf sensor there car right now has a 97 tb and maf on it thats causing a p0171 hence why i need a 02 tb and maf

[BillBoost37]

Erik, you sure can.

As well, it won't automatically set any codes. It might, however when you swap it on, you should put the 99-03 maf table into the tune and then you'd have the right table for the maf in the TB. Flow is slightly different from 97-98 to 99-03. I have tossed an 02 motor into a 98 w/o changing the table and never had an issue. PCM sucked up the slack for me.

[99prixgt]

I have done this without touching the maf table as well, worked well

[Erik Adam Rodriguez]

its has the table for an 02 in it. ive been chasing a p0171 for a while and never knew the tb was the issue blue cleared that up for me. thank you everyone for the help now the hunt is on for a tb to go in