Thread: Weird misfire

After doing my plugs and wires yesturday I now have a misfire.No check engine light,or any warnings in info display are showing. Im running AL605's and MSD wires,all plugs were in properly and wires are all on tight.Im just stumped as to whats wrong now.It idles fine,and under normal throttle it drives fine but as soon as i step on it the car starts skipping and hesitating as it climbs up to speed it pulls very slow because of this.And i rechecked, all wires are where they should be nothing is crossed,any ideas?

Did you have any corrosion on any of the coils at all? Go through and clean them up with sand paper

make sure you got the wires on right.

i didn't even catch that i'm just used to checking them before I put them in everytime

Yea like i said all wires are on their proper locations,coils and all.No corrosion.I never gap or thought to.Could that be it?

could very well be it

I had a set of msd wires I got and I had a bad wire causing the same problem also had a bag plug was cracked after I droped my header on it while replacing the gasket lol

Ahhh this sucks lol.This is just gonna have to wait a few days.

Why not do it now? It'll only take 3o min or so.

Its raining and going to rain till early tuesday,from this tropical storm.Its drivable at least,just cant race it.