XPZ says it requires two different length rods. One for intake and one for exhaust. and then does say you can toss 1.7's on top ofit.
|
|
05-04-2012
XPZ says it requires two different length rods. One for intake and one for exhaust. and then does say you can toss 1.7's on top ofit.
05-04-2012
It looks like on ZZP's website they make it sound like that can only be done with their Stage 4 heads and the comp cams rockers...I have the Yella Terra rockers wich use the longer pushrods.
Stock pushrods are 7.050
Yealla Terra pushrods are 7.300 IIRC
Not sure why you think that you can just run any rods with any setup. You make it sound like anything but stock rockers will make the valves float instantly which is crazy to me. Why is it that several people have done cam/rocker combos in the past and show no signs of valve float....
Last edited by GMR Badass; 05-04-2012 at 01:40 PM. Reason: Adding info
05-04-2012
If you feel like you have to use crappier rockers to decrease power, then just measure out the difference in pushrod length to stock and adjust accordingly. I was able to make a set of custom length pushrods for fairly cheap... ordering a set shouldnt be a big deal.Originally Posted by Quick99GTP
At the end of the day you are still just adding complication and reducing horsepower though.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
