Needing some new plugs and wondering which to choose. Very light mods...FWI, ported sc, no cat, Zzp 10.3mm wires
|
|
02-22-2012
Needing some new plugs and wondering which to choose. Very light mods...FWI, ported sc, no cat, Zzp 10.3mm wires
Last edited by logan809; 02-22-2012 at 10:06 PM.
02-22-2012
Boo ZZP wires.
Autolite 605's.
02-24-2012
Agreed.
New Lifetime warranty plug wires from your local auto parts store.
Autolite plugs...probably 606's or 605's...gapped at .050".
Done and done.
Stock pulley, wants hotter plugs.
02-24-2012
TR6's are what I use when spraying a vehicle.
With that being said 605's. If you drop to a 3.4 pulley then I'd recommend some AL104's.
02-26-2012
Think I'm gonna retire the POS Zzp wires also. Just gonna get some cheap wires, either oem or Taylor, and some 605s from Orielly's tomorrow
02-26-2012
good choice^^^^
02-26-2012
What kind of wires do you use Jarred?
02-26-2012
PRJ Performance Ignition Wires: 3800 PerformanceOriginally Posted by logan809
and thats really only cuz i got em for like 80 to my door brand new...
do I like them? yes (i got the black ones though)
are they overkill? probably...
with your mods I would just go with stock or some 8mm taylors...
02-26-2012
I've heard good things about prj's...arent they just Taylor 409's and MSD boots and crimps?
02-26-2012
I think thats the zzp wires... but im not really sure though it could be... ive had em for 4 years problem free
02-26-2012
who knows. anyone have any idea why summits site says the AL605's arent compatible with a 97 gtp?
02-26-2012
summit???
Why not just listen to us.
Stock delco wires with AL 605's copper cores.
From Napa.
02-26-2012
cuz its not the ones gm use... i get weird looks every time i pull up in my car and get a set of 103s... but then again I get those same looks at a flex fuel pump...
trust us itll be fine...
02-27-2012
Tr6's are too cold for my car which is top swap with an intercooler and a 3.4.
02-27-2012
Too cold? I thought tr6 were the same heat range as stock..correct me if I'm wrong
02-27-2012
No.
Goes like this.
ACD Factory replacements/AL606's
AL605's
AL104's/NGK TR55's
TR6's
AL103's
AL103R's
TR6's are the common choice for people who are past a 3.4" setup but not quite in that "crazy range" with a 3.0" or lower where the 103's are successful
02-27-2012
Got the stock wires and al605s on...no more misfires
02-28-2012
Yes, at least that's what mine are.
02-29-2012
^^^thanks I couldn find anything to answer his question
03-13-2012
Dont want to start new thread and just want a confirmation before i go buy stuff in the next couple days.
I have 01 GTP with intake so autolite 605's would be best with stock wires or taylor and gapped at 0.50 ?
If i cant get the autolites out here what would be my next best choice for the basically the same plug? and would it also be gapped at 0.50
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
