well i through the little scanner on before this drive again, it should cyl. 3 misfire, and TPS circut A voltage low. cleared the codes and ran it down the street a couple times and miss is there but the light wouldnt come back on. It almost feels as though its hitting a governer at 5k rpms. I did check the cyl. 3 injector though and it had a resistance of 12.9 ohms. the others in the rail were fairly close so Im thinking theyre ok, but I also checked the 6 spare injectors I have laying around and all six of those are reading 11.2 ohms exactly. Only problem is I cant find a spec of what the injectors are suppose to be