Will stock injectors be enough for an s1x, gen v with a 3.4 on stock heads or should I get 42.5 injectors?
|
Will stock injectors be enough for an s1x, gen v with a 3.4 on stock heads or should I get 42.5 injectors?
42's fa sho.
There's a classifieds section for that.
Yeah stock injectors should be ok, but you know you wont be done modding so go 42.5 or 60s.
Go greentops! I will be gettin inectors for xmas...so sellers be readythen comes 300+ whp finally
Chris..Rule of thumb is that stockers are good on a Gen V until you hit 3.2" pulley size. That's where they typically start to run out of room.
When I initially modded to an S1X/Gen V/N*/3.4" I stayed with stockers to keep costs down.
I ran out at 3.3....but I agree with these guys on staying stock as long as possible to save money
I'm not running super rich. Just a tad
Future setup, go 42.5's.
Here's part of the thing. The larger the injector the less atomization of fuel happens. the spray on stockers is say a fine mist aka most ideal. The spray on something like a 60lb injector is more like a garden hose.
Pig rich would typically just choke it out instead of hurting the motor. Lean...well that's the place most pop pistons and get kr.
Delphi 42.5's are pretty ****ball.
They haven't been characterized thus making tuning fun.
They're disc style, which isn't as good as pintle.
But they're cheap. Thats good right?
Get greentops or look for ones that have been characterized already.
Also invest in rewiring your fuel pump.
When your IPW reaches 16.5+ you should consider upgrading.
« Previous Thread | Next Thread » |
Tags for this Thread |