Hey guys. I just finished putting a new engine in an impala an 04 impala and now its throwing the po366 and the rpm's kind of jump around a little. When i tried to give it some throttle a little from the engine bay it stutter a little some more.
|
|
09-08-2011
Hey guys. I just finished putting a new engine in an impala an 04 impala and now its throwing the po366 and the rpm's kind of jump around a little. When i tried to give it some throttle a little from the engine bay it stutter a little some more.
09-08-2011
So what's that code mean? Not being a jerk, but if you can post a thread...I'm sure you already looked up the description.
09-08-2011
P0366 Camshaft Position Sensor B Circuit Range/Performance (Bank 1)
I'd check the wiring and if it's plugged in.
09-08-2011
Ok ill double check
09-08-2011
Ok so i checked the cam sensor and it was plugged in but as i looked near the coil packs i saw that the ground near the coil bracket was just hanging and not grounded.
I then knew that had to be it. I grounded it and everything is good and no more code and running smooth.
| « Previous Thread | Next Thread » |
