Thread: Trouble codes after header install

I'm getting trouble codes after i fixed my burnt wiring following my header install. I'm getting a P0102 maf or vaf a circuit low input and a P1676 which my code reader says dtc not found. When i try to rev my car it cuts out for a sec then catches up. Does the same thing with the maf unhooked. I also am running catless and don't have a rear O2.

I didn't do headers but got the P1676 after having my EGR removed and doing a ported S/C and tune. Nick just tuned it out for me.

What wires were burnt and how did you fix them? Are their others?

I soldered them together. no others. It was a vacuum leak at the brake booster. My trans dipstick was pushing against it lol

and also my tb is leaking all around it so i guess i'll pull it off and reclean it

Originally Posted by SeanGTP

I didn't do headers but got the P1676 after having my EGR removed and doing a ported S/C and tune. Nick just tuned it out for me.

You still have an egr you dont have evap.

Im guessing the p1676 is from not have a post cat O2

Originally Posted by TheOtherNick

You still have an egr you dont have evap.

Then why did we tune out the EGR code? :P

I figured it out!!! When the wiring burnt it popped the #21 fuse under the hood. Changed the fuse and all is good I'm very happy now i can beat on my car again without worrying about it breaking.