I'm getting ready to install my headers and I figured i'd delete the EGR while i was at it. I know until i tune my mpg will be a little lower but is there any other down sides? Thanks
|
|
07-26-2011
I'm getting ready to install my headers and I figured i'd delete the EGR while i was at it. I know until i tune my mpg will be a little lower but is there any other down sides? Thanks
07-26-2011
leaks and a few codes.
just make sure you seal it up good.
07-26-2011
I think EGR delete will increase cylinder temps and is recommended against without an intercooler. I may be wrong.
07-26-2011
well because since now that the exhaust gases are no longer there, more air and fuel are now taking up that space and making a smidge more heat, but if you got headers it can get that heat out faster with no problems. I have zero issues with having no egr on my car and wouldnt think twice about it again.
07-26-2011
why delete it if you dont have an IC? there really isn any gain from it that I know of...
07-31-2011
I think one benefit IMO is keeping the intake system cleaner... Your dumping all that carbon and exhaust in there, it cakes up everything... Me personally, I love keeping everything nice and spotless... :-)Originally Posted by gtpsleeper
07-31-2011
I reinstalled it i figure i can delete it down the road if i want to.
08-04-2011
way to let teh sheep change your mind
Originally Posted by TLSheff
08-04-2011
EGR sucks.
Emissions are dumb and are for hippies.
Take it off...let your engine enjoy fresh air...not recycled hot exhaust crap air.
Which is the reasoning behind gunked up, carbon filled throttle body issues. It costs 2 cents and some RTV.
08-04-2011
I used it to pass my e-test.
Almost zero emissions.
08-08-2011
Pshhh.... I don't have emissions tests here so eat it.... Lol in Kansas we don't care!
08-04-2011
So being new and uneducated on this subject, what does deleting it do? More power? More efficiency? I've heard about it and was just wondering.
08-04-2011
Cool, thanx. Lol
08-04-2011
I don't get to be a smartass very often, but when I do...I use LMGTFY
08-04-2011
**** hippies....
08-06-2011
Where might I be able to find the block off plate for the EGR valve. I know ZZP has a block off plate for the exhaust hose for the EGR, but is there a plate for the actual EGR itself?
08-07-2011
Yeah...you use the factory ones after you cut off the gold factory tubing from each bracket...
08-06-2011
The egr goes away you need two block off plates one goes on the exhaust and one goes on the intake manifold under the tb
08-08-2011
I used the two old tabs and welded the holes shut.The only tricky part it grinding the weld flat.My main reason for the delete was not having that ugly a$$ egr solenoid
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
