Alright heres the deal, i get a SES light and scan the code and its the multiple misfire code, on my scan gauge i put on the misfire selection to see what cylinders are misfiring.. cyl 2 is misfiring up to 180 only at idle though, as soon as i reach above 10mph it goes to zero and will remain at zero until the car is turned off. So i guess it really only happens when i turn on the car, and im going to start looking for vacuum leaks tomorrow but is there is something else that i should be looking for? I checked all plugs and wires but not coil pack..
what can i do to fix this ****ing problem![]()