17? 10 lugnuts, 1 steering shaft, 2 rack bolts, where are the other 4?Originally Posted by scottydoggs
17 bolts from hell, 10 are the lug nuts, yup been there done that
|
|
10-30-2011
17? 10 lugnuts, 1 steering shaft, 2 rack bolts, where are the other 4?17 bolts from hell, 10 are the lug nuts, yup been there done that
10-30-2011
2 tie rod ends, and the 2 lines. well its 2 more if you think about it, the lock nuts on the tie rods. so 19 bolts.
and the sway bar, its a few more than that, thats another 6 bolts.
10-30-2011
oh i never had to mess with my sway bar when i did mine
10-30-2011
sweet... that's a $300 part too
10-31-2011
i got a rack from autozone and it was $150 iirc
10-31-2011
well that's 50% better than 300 lol. didn't get to it tonight. had some other stuff come up
10-31-2011
are cars arent going to be 100% for a long time are they lol
11-01-2011
mine hasn't been out of the barn since the end of july lol. once i get the steering rack fixed, i have to figure out the misfires. seeing as the rails and injectors have been sitting for probably 2 years, i'm gonna start there lol. plugs are new, wires have 20k-ish. i used the coil packs off the old motor for some reason... stripped mounting screws come to mind but idk. maybe it'll go away with a tune and some oxygen sensors
11-01-2011
Seafoam it that should help
11-01-2011
any step by step for that?
11-01-2011
pull a vacuum line with it running and stick the vacuum line in the bottle of seafoam and rev it by hand and let it suck up the whole bottle then hurry and shut the motor off and let it sit for 5-10 min then fire it up and it'll smoke like hell but it'll clean it out really good.
11-01-2011
i did the seafoam, i just pulled the brake booster hose and dumped it in there, follow the directions on the can, you'll be fine.
11-02-2011
fixed the steering column tonight. it separated at a spot in the interior right above the pedals. talk about awkward positions... my back is gonna hurt tomorrow morning. but it's all back together and sitting on a battery charger. i'll get to the seafoam tomorrow night after work and then it should be ready to make it's first venture out of the barn in 3 months.
11-04-2011
I drove mine the other day... it wasn't ready to be driven
11-04-2011
Drive it anyways^^^^^^^ lol
11-04-2011
are you getting misfires too? lol
11-04-2011
phil if you need coils i have some if that is what's causing your misfires.
11-04-2011
that's what i'm leaning towards... i have the ones that came off the car originally, but thanks man. i would go out and work on it but the open headers piss off the neighbors... and the rest of the street. i'll probably just switch them out sunday and see if that helps
11-05-2011
I figured out whats up with mine... if I fix mine first you have to give me some free fries from bk when I drive it through while your working
11-06-2011
so i never did a CASE relearn when i swapped out the pcm... could this be causing problems?
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
