|
|
08-25-2010
When bleeding the brakes, i step on the pedal then let off and it makes a grunt noise. They felt slightlly spongy with the car off. After starting the car i lose all pressure. so i picked up another EBTCM and a new master cylinder. Still the same thing. does this sound like i need a new brake booster?
08-25-2010
sounds like there is a ton of air in the line if i'm not mistaken
08-25-2010
Please give us some background as to what led up to the lack of brakes.
Did you replace calipers, if so..bleeder must always be higher than the hose leading to the caliper.
Did a line break?
Do you have a second person helping you bleed, a power bleeder or one man bleeder screws? If not ...your procedure would leave you with air in the system.
08-25-2010
bleed bleed bleed my friend sounds like mass air in the lines also did you bleed the new master cylinder ?
Like billboost said about the bleeder screws they need to be higher then the lines too
08-25-2010
Well i think i just found my answer. The master cylinder was not bench bled.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
