430+ whp on an m90?

[DaytonaGTP]

i found this on zzp last night apparently theyve hit big using a 3.0 pulley. somehow i doubt this but hey anything can happen

ZZ Performance

[Bio248]

apparently you didnt read whos car that is...

of course the OWNER of zzp will have the high hp record for an m90. he also has one of the only m90 cars that runs 10s. he has all the parts and one of the best 3800 shops at his disposal so if he didnt hold that record then itd be a shame.

making that much power on a normal grand prix would be impossible. most m90 setups max out in the 350whp range for a reason. the motor in that car is probably $10k worth of parts alone.

[TorqueAutoMotiv]

yea seriously

[FoSHO99]

That 3.0" on there also equates to a 2.8" pulley on most setups with the balancer they put on there.

They love breaking records. They've also worked on enough cars over the years to know what works and what doesn't.

[ls6velless454]

It runs e85, full size IC, a gen V. I'm pretty sure someone can copy their setup and yield similar results.

[blueguy]

It runs e85, full size IC, a gen V. I'm pretty sure someone can copy their setup and yield similar results.

Doubt it...unless someone is dumping enough money into a WBody that is worth 3K and its enough to pay for more than half of a nice C5 Z06

[FoSHO99]

Doubt it...unless someone is dumping enough money into a WBody that is worth 3K and its enough to pay for more than half of a nice C5 Z06

No ****. People barely break 350whp with a decent cam, genV and a nice intercooler on a high compression block. Every horse after that is $$$$.

[ls6velless454]

So what kind of money are we talking here?

[Bio248]

So what kind of money are we talking here?

more than you have, mr. trump.

[guys00gtp]

I have a friends 00 gtp that put down a shade over 340whp last summer. still running stock blower with a 3.0 pulley

[blueguy]

I have a friends 00 gtp that put down a shade over 340whp last summer. still running stock blower with a 3.0 pulley

Must be bottle fed then...no Eaton M90, especially a GENIII with a 3.0" is making ANYWHERE over 340 FWHP

[guys00gtp]

its a gen 3, stage 3 ic, 3.0 pulley, xp cam, zzp 1.0 pcm, togs, injectors i think thats all. i was there at dyno time so.....

[FoSHO99]

its a gen 3, stage 3 ic, 3.0 pulley, xp cam, zzp 1.0 pcm, togs, injectors i think thats all. i was there at dyno time so.....

well you left that information out in your first post... but thats about right for those mods.

[guys00gtp]

best time we got so far is a 12.71 it was around 110mph. that was last year. this year only gettin 12.81 best. the ic pump was on fritz and finally went last week. the other thing is i need more practice tuning car. i got a dhp tuner

[blueguy]

ewwww...screw the IC and put meth on it

[FoSHO99]

best time we got so far is a 12.71 it was around 110mph. that was last year. this year only gettin 12.81 best. the ic pump was on fritz and finally went last week. the other thing is i need more practice tuning car. i got a dhp tuner

Yeah, there are a lot of different ways you can go with the setup and tune to get good results. I tuned a regal which ran a 12.7 with a 3.3" pulley on a s1x cam, non-IC, non-Meth. Thats on a 2.0 60ft. This year we ran consistent 12.8's on 2.1-2.2 60fts. If we could cut the 60fts down to 1.7-1.8 we'd be making some decent times.

[16MustangVet]

Alright so let me make sure i got this right its the zzp owners car makes 400 some hp on a M90 has a **** load of money in the engine. Can some one explain why in the hell they didnt turbo it??? M90 blowing through a damn straw, Turbo more like blowing through a sewer pipe. I dont get the point of this. The money doesnt reflect the hp in that car at all. Id dare say a turbo car could make 600 hp for half that.

[Bio248]

because he has the fastest m90 car.

its already been shown that joe shmo down the street can make 500+ whp on a turbo setup.

[16MustangVet]

yeah and joe schmoes car is faster and cost less FTW

[Bio248]

thats not the point, but continue thinking like a fourth grader.