|
|
04-29-2010
Hey guys. I picked up some ported/polished L26 heads which I'm going to be putting together as soon as I can. I'm going to be getting 1.95 roller rockers, and I am unsure which valve springs to buy. Some people say LS6 springs, some say L76 springs. Which ones do I need?
Thanks!
04-29-2010
How about Crow #105's...best spring out of the 3.
IMO, if your set on one of your choices...get the #90 LS6 springs...I ran those with my XP setup and had revved it around 6500...with no issues of valve float
04-29-2010
Thank you. =)Originally Posted by bluegtp91
How about Crow #105's...best spring out of the 3.
IMO, if your set on one of your choices...get the #90 LS6 springs...I ran those with my XP setup and had revved it around 6500...with no issues of valve float
04-29-2010
Assuming you're not planning on revving that high, the L76 springs would do the job with less stress on the timing chain, and they're cheaper.
04-29-2010
LS6 springs are pretty cheap too, especially on EBay...I got all 16 of mine for like $50 shipped.
04-29-2010
That's about what ZSPOT sells them for and they're coming from a Dealer. At least you can be sure your getting what you paid for.
04-29-2010
What's ZSPOT?
04-29-2010
huh, oh well...I knew the EBay seller pretty well so I wasn't worried...and they worked until I needed stronger ones
04-30-2010
Zspot works in a GM dealer's parts department. He can be contacted at North American Impala Owners Association - Forums
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
