|
|
04-21-2010
I had bought the speed daddy headers and I cannot seem to get the rear header installed. I have had the motor pulled as far foward as possible, valve cover off and tranny dipstick out and to no avail. I really need some help on this because I have the car torn apart in the driveway and Its going to snow this week. Thanks!
04-21-2010
Do you have the front header on it? If so...take it off...that'll make the install a breeze...other than that...idk...everytime we've tried something like that they just drop right in with a little twist.
04-21-2010
I did have it on but then took it off to see if the motor would come back any further and to no avail.
04-21-2010
If you really cant get it. un bolt the motor mounts and lift the hole motor/tranny up a little. just be careful not to go to far and pull any wires but you should be able to easily get it with the motor pulled forward..
04-21-2010
what are you using to pull the motor forward?
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
