|
|
11-06-2009
I Have been wanting to get more power out of my supercharger and I have already put a 3.5'' pulley on but i want to go down to a 3'' pulley, but I have been told that in order to support a 3'' puelly I need an inercooler, but I have no idea were to find an inercooler for a supercharged 3.8L or how it would work, and are they expensive? Any info would very helpful
11-06-2009
3.5 pulley on a stock motor, eh? HOORAY.
11-06-2009
Wow you need to use the search button bad....
btw motor=
11-06-2009
you need suporting mods and tuning to drop pullies. its not as easy as just droping pullies.
11-06-2009
Put the 3" pulley on there now....thats like 20psi...MUCHO FAST.
Plus...I'll want to be about 50 cars behind on the zoom button video taping you when you go WOT around 70 ish and watch the sparks fly
11-06-2009
Unfortunately, its usually not that spectacular. Oh well.Originally Posted by bluegtp91
11-06-2009
https://www.zzperformance.com/grand_...cts.php?id=139
honestly if u dont have anything to support even that 3.5 pulley, u might as well take it back off, put the stock one back on and read the supporting mods thread for that kind of setup before u even think of just jumping to an intercooler. U need free flowing exhaust, a reprogrammed PCM, etc. etc.
11-06-2009
Sorry I have failed to mention that along with the 3.5'' pulley I have a cold air intake, cooler set of spark plugs, and a 180 degree thermostat.
11-06-2009
still not enough. you need flow mods (exhaust).
11-06-2009
Yah Your Right and that is my next mod just dont have the money to buy headers or a cat-back system and another question will a high flow cat give noticable power or not really? And one last thing is anyone familar with Xtune or ZomkSpeed headers I found them on an EBay store for really cheap, are they any good?
11-08-2009
i would get a set of used headers like zzp, tog's, slp's, ssac, s&s ect. but for now i would put the stock one back on.
11-06-2009
High Flow cat does nothing.
Catback does nothing.
EBay headers are epic failure...
Jesus christ dude we told you to read the thread that I took nearly a month to type up. At least give me the common courtesy to read the damned thing before asking stupid crap that like.
11-07-2009
easy there killer.
11-07-2009
Well...it just irritates me...and it prolly would you too if you took all that time to HELP new people out and you try to point them in the right direction and they sit there with their finger up their ass wondering why we dont help them.
But I'm just a azzhole right?
11-07-2009
naw blue not at all. hell if i took that much time like u did to write that much of a thread up to help all the noobs id be pissed too.
11-08-2009
actually your thread was not mentined before that. maybe they over looked it. either way it does not help to critisize someone for not knowing.
they are simple misinformed people that need direction. critizing them because they simple dont know, yea kinda azzholeness. but at the same time you took time out to help the comuntiy with your thread. just post it up and be done with it.
11-07-2009
i could take more time to ADD to that thread, but im lazier than thou. WIN.
11-07-2009
But you get drunk and dont so your all talk
FAIL
11-07-2009
3.5 on a stock motor = pistons 1, 2, and 6 gone. for me at least. really go read the safely modifing your 3800 thread. and get that 3.5 off NOW. it'll be pricey if you dont....
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
