Thread: aeroforce gauge

got it hooked up and everything but in order to turn it on i have to unplug it and plug it back in everytime? any ideas why?

Cause thats the way it works. in order for it to come on with the key u have to do the wiring. It tells u how in the directions I think u just run the red to a switched 12v idr right off ill go out an look at mine in a minute for ya .

yep red goes to switched 12v an thats it. the green and red u do not hook to anything. O also in order for wiring it like that to work u have to pull the the small red jumper out of the back of the gauge

Originally Posted by speedemongtp

yep red goes to switched 12v an thats it. the green and red u do not hook to anything. O also in order for wiring it like that to work u have to pull the the small red jumper out of the back of the gauge

Red is for a switched source, and you do have to remove the jumper on the back of the gauge (if I remember correctly). The other two are for the analogue inputs.

Glad you got the gauge. Let me know if I can help anymore.

Ha writing error thanks for catching that sabre it should have said green and white do not go to anything.

alright its ready to go now! totally skimmed over that in the directions....whoopsy! thanks guys!

BTW thanks for the gauge sabre!

anytime thats what were all here for

what exactly did yinz connect the red wire to?

a switched 12v power source

I did this...the add-a-curcuit...works like a charm!

^ what he said. i power all my gauges off one of those.

I like those things they work good