I dropped #3 cylinder, and I am a bit stuck. I replaced all coil packs, and tested each new pack for spark, each one will throw a spark 1"+, I replaced the #3 plug with a known good plug, I replaced #3 wire, and still dead cylinder. I did a compression test on the cylinder and it pushed out 145psi on the gage so the cylinder has compression. I ran the motor for about a minute and felt the exhaust ports, and it is for sure #3 cylinder, I have 5 burnt finger tips to prove it.
The only thing left to fire a cylinder is fuel. Is it possible to have an injector go bad where it wont put fuel in the cylinder? What is the best way to test/check injectors.
Thanks for any input or ideas, things to check. I am kinda stuck on this one.
