Quote Originally Posted by GeddyLee View Post
I had that same code before. It read that bank 1 sensor was the problem. IE an O2 Sensor. At least that is what the Autozone computer said. I thought maybe I hit the rear sensor at the top of the DP when I was changing out factory spark plug wires.

So I went back in and disconnected the battery the following the morning and left it offline for almost 2 hours and came back and rechecked all connections, even the O2 Sensor and then reconnected the Power to the battery and the code was cleared. Hadnt come back since.

Glitch or not? Not sure cause if it was truly a bad sensor it would have kept coming back.
the P0171 is NOT an O2 code. i know it seems like it could be, but it's not, at least according to the trouble code diagnostics from GM that i posted up over on the how-to section. anywhoo, mine was a vac leak, allowing unmetered air into the system after the MAF.

Quote Originally Posted by GeddyLee View Post
You know I had to poke a little jab in there my friend

Good luck on the project. If you have any questions or need to take any photos of mine for ya? Please let me know. I will be more than glad to help ya with as best I can.

Thanks for the help... Mark is gonna assemble most of it i think, i may need to sacrifice a usb cable to put it together, but that should be about it.
but if i get stuck, i'll give ya a holler.