well i need to find something to do while my lower block is getting rebuilt (FML) and ive been trying to find a write up on porting our LIM or S/C can anyone help a brother out?
|
|
04-02-2009
well i need to find something to do while my lower block is getting rebuilt (FML) and ive been trying to find a write up on porting our LIM or S/C can anyone help a brother out?
04-02-2009
If you're going to port the LIM you may as well just gasket match the intake runners and polish them. Although it would seem like a good idea to not polish them. For the supercharger just kepp the outlet the same shape and take more out on the bottom of the triangle. Other than that there is not much to do.
04-02-2009
do not do anything port wise to the LIM unless you do it to the heads too.
the blower, like parker said, just extend the triangle to take out those square parts that portrude into the outlet. you need to keep the same angle, just extend it.
04-03-2009
Green Bastard Products.
Enough Said.
04-03-2009
Money is a problem nuff saidOriginally Posted by bluegtp91
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
