Headers for 06

**mechanicboy** · 01-08-2016

I'm looking at this kit on eBay but it says it's only good through 2005 model year. What I was reading on here was saying that they should be the same through 2008, is that correct?

Lastly, will this connect to the stock CAT?

Thanks

http://m.ebay.com/itm/STAINLESS-SS-R...604?nav=SEARCH

**Below Average Joe** · 01-08-2016

I don't have headers, but those will work with your application. They should connect to the cat. Somebody will chime in with a little better explanation.

**Scottydoggs** · 01-08-2016

they fit fine.

all headers come with a 3 inch down pipe without a cat. being your in CA you'd be best to cut off your stock cat and weld it in the 3 inch down pipe. just make sure you cut the cat open to a 3 inch hole in and out for the 3 inch pipe you will have.

**mechanicboy** · 02-03-2016

I think I'm going to pull the trigger on these(found out my crossover pipe is leaking because it's rusted out when I thought it was just the gasket).

I just have one more question, will these keep the EGR? I ask because my smog tech doesn't care about modifications, as long as the tailpipe and computer say all is good.

**Scottydoggs** · 02-03-2016

egr hooks up like it should. 100% functional.

another ca member said they dont pop the hood on the 01 up gp's. just odb scan and tail pipe sniffer.

Thread: Headers for 06

Thread Tools

Display

Similar Threads

What headers to get?

Headers..?

Headers vs PEM's/Dp

XS Power Headers Vs. SSAC Headers

Bookmarks