I have a Aftermarket, what looks like, Custom CAI. The tube has a small whole in the top and one in the bottom that are less than a half inch in diameter each. I want to plug them but Im not sure with what. The tube is like a normal stretch tube, but there is something that was wrapped around it that the hose is as stiff as fiber glass, and its black. Can i just wrap it in fiberglass and be done with it? Or is this a no no?
The second is a my coolant leak, it is leaking onto a pulley that is just off to the left and bellow the coil packs. Its the center most pulley... its collecting in a grove above that pulley and is a significant leak. I went from overfilled by a little, to below the cold level while running at Operating Temp in about a month and a half id say... Im just not sure where its coming from... i have no idea where its coming from. Any Ideas?
I have pictures, if I cant figure out how to directly upload them, I'll make a Photobucket and link it. My Canon camera takes too good of a picture for me to uplaod it via the attachment button, its 3.4MB for the smallest picture
