|
|
06-09-2010
I removed the upper intake and there was oil pooling in the inside bolt areas. I was told thats not good at all.....I was told that the lower intake could be cracked due to the last owner or so over tightening the bolts.. i have no other explanation as to why oil would be up there.... I'm seriously stuck. Any help will be greatly appreciated....Thanks
06-09-2010
its normal.
just dry it up. its oil getting past the pcv valve, which is normal for these cars. mine has it when i take off my UIM
06-09-2010
Oh ok I wasnt sure....before it was realized that the bolts were inside a friend was prying on the intake....should i worry? He was flexing it pretty good!!!Originally Posted by Warbeaver
06-09-2010
Yup^ miss read the first time.
06-09-2010
Oh ok I wasnt sure....before it was realized that the bolts were inside a friend was prying on the intake....should i worry? He was flexing it pretty good!!!
06-09-2010
closed your other thread since you had two...
06-10-2010
the first one was in the wrong area....supercharged, this is the right one but thats fine.
06-11-2010
ya i had the same oil pooling in my lim
06-12-2010
yea them two bolts are hard to see so normally u would pry....then u will see them when the prying doesnt work. these are pretty strong. i doubt its cracked, its normal oil gettin passed the pcv. u dont want to see any chunks up in the oil though...hehe
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
