I am getting ready to do upper and lower intake gaskets, valve cover and injector rings. Anyone have any recommendations on where to get them from? Brands to get or stay away from? Anyone sell a complete set of everything needed?
|
|
02-22-2010
I am getting ready to do upper and lower intake gaskets, valve cover and injector rings. Anyone have any recommendations on where to get them from? Brands to get or stay away from? Anyone sell a complete set of everything needed?
02-22-2010
GM.
Everything.
02-22-2010
I bought a complete set from autozone and it ran me about 160 ish. IT was the complete upper gasket set.
02-22-2010
Anyone have the gm numbers for the Lower Intake Gasket and valve cover gasket?
02-22-2010
plastic intake gasket im assuming?Originally Posted by shawngtp
Originally Posted by SuperSport
02-22-2010
I'm looking for the part number on the newest alum set.
02-22-2010
Got everything order from rockauto. Most parts were ac/declo. Lower was fel-pro. Going to tackle this weekend.
02-22-2010
Fel-Pro makes an all aluminum LIM gasket now? I hope so, for your sake.
02-22-2010
LIM needs to be GM else it will still be plastic IRRC
02-23-2010
Oh ****! Guess Since it said 2nd design, I assumed! We all know where assumming gets us!
02-23-2010
Ok, educate me .... Is GM the only one that makes an Aluminum LIM gasket? Do I just ask for one for an 04 or later 3.8 or did it replace the series II gasket also? Anyone have a part number?
02-23-2010
I got mt LIM and UIM gaskets from ZZP. They were the new metal gaskets.
02-23-2010
Fel pro's 2nd design lim gasket is also plastic. I ordered all my gaskets from zzp when I I'd mine because I had a bunch of other stuff I was getting at the same time.
02-23-2010
OK, did some digging and discovered that the part number from GM is 89017816 for the aluminum gasket. This is the same part number for all seriesII and seriesIII 3800's. 97-08.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
