Ok, a while back i changed my lower and upper intake gasket (imagine that!) and was pushed in a hurry and got my rods mixed up, the question is, what is the correct placement of the rods in the 3.1? its a '00(know it doesnt make a diff though)
|
|
11-05-2009
Ok, a while back i changed my lower and upper intake gasket (imagine that!) and was pushed in a hurry and got my rods mixed up, the question is, what is the correct placement of the rods in the 3.1? its a '00(know it doesnt make a diff though)
11-05-2009
rods? how did you ge to the rods when you were doing intake gaskets? do you mean PUSHRODS? if so they should be all the same length.
11-05-2009
dont know the technical name, loosen the rocker arms and pull to replace the lower gaskets. and no they were not the same length. 6 on each side
12-28-2009
I can see this post is over a month old, but im not sure if you got it fixed
I recently bought a 96 pontiac grand prix, 3.1 SE edition, and found out the head gaskets are broke, and much other **** was wrong.The guy was a complete idiot and didnt know how to take care of a car..
Ive got a 2005 GTO LS1 Supercharged, on 30LB.. hitting over 700 REHP.
But, RODS Go : EXCHAUST:Long Intake Short, Go to autozone and buy a Haynes Repair book on this car, its about $20, but worth it..It helped us alot, wen getting further down in to the car.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
Originally Posted by Bio248
