Quote Originally Posted by BillBoost37 View Post
Once you have it scanned. If there's no codes and you don't have 4th, it's likely just a 4th clutch hub. Which means. You can lower that side of the cradle and fix it. The tech buddy that could do the rebuild, could also fix this in a few hours. Once you know what is or isn't...then take a look at the post I put up about fixing a 4th clutch hub shaft.
I had it scanned today and it had no codes, except low voltage map sensor in which mine has the AFH50M-04 in my car and wonder if the AFH50M-05 would work in it. Anyway, I bought a bad tranny for 50$ and I made sure the codes matched also to make sure it's the same tranny and I'll have it rebuilt while I'm driving my car to avoid lots of down time.