Thread: Trannyman95 Please help! 2-3 up shift late and no show.

Originally Posted by JJ91284

Short answer is the trans rebuild was done very poorly.

Ask him these questions

1) what valve body work did he do and what sensors did he replace (make sure you ask for exact specifics and write it all down)

2) Ask him if he replaced the input clutch piston and if not asked him if he addressed the inner lip wear issue and how he did that.

3) Also ask him if he just did a standard clutch pack configuration with all new frictions and newsteels.

Report back what he tells you, but make sure he is very specific on the valve body. When you post back I'll see if he addressed all the major concern issues that should be addressed with a rebuild.

JJ91284:
Thanks for the play list, JJ91284. I wrote it all down 1, 2 & 3. I will use the questions to take notes and report back here. (I'll know more when I pick the car up this afternoon and drive it).

Will update later, as more info is available. Thanks everyone.