|
|
02-17-2010
Trans bell housing to engine should have 1 bolt on the passenger side (accessable once you take off the engine to trans support bracket which connects to the trans diff area. The drivers side trans bolts should have 2 studs and 3 bolts. There should be a total of 6 pieces of hardware holding the trans bellhousing to engine and 4 bolts attaching the trans diff bracket to the engine.Originally Posted by adamtrippin
02-18-2010
oh great i only got the 2 bolts and one stud on the driver side, and i think i got the right bolt on the passenger side.... the one that goes towards the front of the car??(think its the right one)..... so i gotta find 1 more stud and 1 more bolt.... and where is this "trans diff bracket to the engine" is that between the engine and trans on the oil pan? or is it next to it??? soo confused lol... but i just wanna get this done...
02-18-2010
can you show the other side of the trans? like a 180 flip of that pic? it would be much apreciated.
02-18-2010
the engine to diff bracket goes in behind where the oil pressure sensor goes if you look throught the pas side wheel well with a flashlight and you can see the oil pres sensor behind it you will see to bolt holes on the trans facing you and the other 2 bolt holes are on the engine side facing backwards
I actually had to take my oil pre sensor out to get to the engine side easier
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
