Thread: 3800 performance shift kit

down a bit is says wont work on 4T65E transmissions i think its a typo.
but damn thats cheap lol, im not super inclined though. do you have a write up on how to do it? im still learning about transmissions and stuff

Originally Posted by nicksilvergt99

down a bit is says wont work on 4T65E transmissions i think its a typo.
but damn thats cheap lol, im not super inclined though. do you have a write up on how to do it? im still learning about transmissions and stuff

Do you mean here:

NOTES:
- This kit will NOT work in a 4T60 transmission. The trans is very similar to the 4T65E, but not close enough.

- Clutch life is improved because of the reduced shift time. Anytime you are between gears you are slipping the clutches until you reach the point where they lockup. This wears the clutches and generates heat. Less time on the shift = less clutch wear and heat buildup.

- The kit will also work with the standard version of the 4T65E. (Supercharged cars get a HD version.)

Notice that the first note says it will not work with a 4T60 transmission, and the last note says it will work with a 4T65 transmission. 4T60 =/= 4T65.

As for a writeup, check out the thread at CGP:

DIY Shift Kit

And also the PDF they mention there:

DIY Shift Kit & Filter/Fluid Change

Edit: And just noticed that you are from Reading. If you ever get to Central PA, stop at my place and I can show you how to do it.